35
Star
ting th
e Pr
ogr
am
OPERATION
CANCELING THE PROGRAM
1. Press the Program Sel Cancel button for 3 seconds to cancel the program.
2. After 3 seconds, “1” will appear on the display. For a couple of minutes the dishwasher
will fulfill the necessary operations required to cancel the program.
NOTE:
There might be residues of detergent or rinse-aid left in the dishwasher and/or on the
pieces being washed depending on what step the canceled program was in.
RINSE-AID INDICATOR
Please check the rinse-aid indicator on the control panel to see whether there is adequate
amount of rinse-aid in the dishwasher or not. Refill the rinse-aid reservoir with rinse-aid
whenever the rinse-aid warning indicator appears on the control panel of the dishwasher.
END OF PROGRAM
“00” will be displayed when the washing program is over.
1. Open the door of the dishwasher.
2. Press Start/Pause + On/Off button to turn off the dishwasher.
NOTE:
Leave the dishes in the dishwasher for about 15 minutes to cool down after they are
washed. The dishes will dry in a shorter time if the door is left ajar during this period. This
process will increase the drying effectiveness of the dishwasher.
WATER CUT-OFF WARNING
If main water is cut or water inlet tap is turned off, the dishwasher cannot take water in and
“FF” will flash continuously on the display. As long as the problem continues, the washing
program will be stopped. If the water inlet is fixed and water is provided, the dishwasher will
get ready to start a new program.
PERFORMING A DRAIN CYCLE
It may be necessary at times to perform a drain cycle to empty water in the dishwasher. This
can be done by canceling any cycle or program. Press the Program Sel Cancel button
for 3 seconds to cancel a program. After a cancellation has been initiated and the door has
been closed, the unit will prompt a 60 second drain cycle.