22
Completing Installation
INSTALLATION
Step 12: Completing the Installation Continued
6. Install the panel to the outer door of the dishwasher.
• Install the hook and brackets on the dishwasher panel (see Figure 18).
• Put the hook into the slot of the outer door (see Figure 19).
• Fasten the dishwasher panel onto the outer door with the correct screws and bolts
(see Figure 20).
Figure 19
Figure 18
Figure 20
7. Adjust the tension of the door spring.
• The door springs are set at the factory to the proper tension of a field installed ZLINE
panel. If a custom panel is installed, you will have to adjust the door spring tension.
• Rotate the adjusting screw to drive the adjuster to strain or relax the steel cable (see
Figure 21). Both adjuster springs need to be adjusted evenly or water leaks could
result from a poor seal.
• Door spring tension is correct when the door remains horizontal in the fully opened
position, yet rises to a close with the slight lift of a finger.
Figure 21
Scan to follow along with a video.
