20
Wiring Connections
INSTALLATION
Step 11: Electrical Wiring Connections
1. Before connecting the power cable to the dishwasher, make sure the circuit breaker
is completely turned off.
2. In the junction box located at the front bottom right of the dishwasher, find the three
power wires from the dishwasher, including the green grounding line (Figure 15).
3. Pass the power cable through the strain relief and into the junction box. Connect the
black wire of the dishwasher to the black wire of the power cable by inserting both
into a twist-on wire connector and then rotating until snug (Figure 16).
4. Connect the white wire to the white wire and the green wire to the green wire in the
same manner as Step 3.
5. Recheck the wires to ensure they are connected correctly and securely. Each colored
wire should be connected to the corresponding wire of the same color.
6. Replace the junction box cover on the dishwasher.
Figure 16
Figure 15
CAUTION
Electrical Shock Hazard
To avoid electrical shock, do not work on an energized circuit. Doing so
could result in serious injury or death. Only qualified electricians should
perform electrical work. Do not attempt any work on the dishwasher’s
electric supply circuit until you are certain power is disconnected.
Fire Hazard
To avoid fire hazard, make sure electrical work is properly conducted.
Only qualified electricians should perform electrical work.
