- Reposition the engine on to the engine mounts so
the distance from the prop hub to the fire wall is
132 to133mm.
- Remove the engine and drill a 1/8”(3mm) holes
through the beam at each of the four marks made
above.
- Reposition the engine on the engine mount beams,
aligning it with the holes. Secure the engine to the
engine mount using four 1/8x51/64”(3x25mm)
screws.
132 - 133mm
- Mark the engine mounting plate where the four
holes are to be drilled.
Note: Mark the mounting plate through the engine
mounting flanges.
3
mm
3x20mm
bolt
1/8”(3mm) nut
.................4
...4
1/8x5-1/64”
ZLIN
Z-526
11- Engine
