Plastic control
horn
2x12mm screw
............................2
.......................4
Push the rudder push-rod with clevis into the black nylon push-rod
guide.
Using the plastic control horn as a template, mark
the mounting hole positions, where the rudder clevis
meet the rudder control horn with a felt tipped or a pencil.
Remove the control horn and drill two 2mm
holes through the rudder .
Attach the rudder control horn using the hardware provided
(two 2x12mm screws and a back plate).
Control horn Alignment
STABILIZER
Push the elevator push-rod with clevis into the
black nylon push-rod guide.
Using the plastic control horn as a template,
mark the mounting hole positions, where the
elevator clevis meet the elevator control horn
with a felt tipped or a pencil.
Move the plastic control horn and drill two 2mm
holes through the elevator.
2mm
Attach the elevator control horn using the
hardware provided (two 2x12mm screws and a
back plate).
Apply a thin layer of
petroleum jelly on the
leading edge of elevator.
CA
RUDDER
VERTICAL STABILIZER
(TOP VIEW)
Apply
thin CA
glue on both sides
of the hinge
Plastic control
horn
2x12mm screw
............................1
.......................2
ZLIN
Z-526
23- Elevator control horn
24- Installing the rudder - control horn
