Screw
Pull out the rain cover; open
the screw pack to take out the
rubber bushings and screws
Figure 11
B. Make a mark and drill a hole on the wall
D. Fix the outdoor unit
Screw
Make a mark and drill a hole
after determining the location on
the wall.
a diameter of
approximately 6mm
1.Drill a hole, with
electric felling
2.Fix the rubber plug into the
hole above
rain cover
outdoor unit
3.Fix the cover with screws.
Drilling diameter: about 1.5cm
1.Take out the outdoor
unit; 2.Connect the 4-pin connector
and the 2-pin connector;
3.Place the outdoor unit in front of
the rain cover and fix the bottom
with the hexagon screw.
Hexagonal screw
Figure 10
4-wire cable
For outdoor installation, a
waterproofing treatment of the
wall must be carried out.
C. Fix the rain cover of the outdoor unit
Figure 12
VDP03-B3 Kit 7
As the picture shows:
Machine Translated by Google
