In the standby mode of the indoor unit, firstly press the ” button to turn on the display, and then press the “ button to activate the
ringtone and enter the “change ringtone” setting. The system is equipped with 25 tones of different lengths. The “ button is pressed
once to change a tone. After selecting the proper tone, release the button. The last volume
will be the ringtone when the system is used by anyone.
1.Mute setting
3. Ringtone volume adjustment
Connection with an outdoor unit
2 Manual
In indoor unit standby mode, firstly press “ button to turn on the display, and then press “ button to turn on ringtone and enter “ringtone
volume” setting.
In the standby mode of the indoor unit, first press the “ button to turn on the screen, and then press the “ button to turn off the doorbell
and intercom, without affecting the image display. If you need to turn on the doorbell and intercom, press the “ ” button again in the
mode
Volume adjustment
”
”
DC 15V Power Interface
“
It has three levels, large, medium and small. Press the “ ” button for two seconds each time to gradually increase or
decrease the volume.
”
” of the monitor.
Connection with the next indoor unit
”
”
”
Figure 2
Disturbance free mode will be activated after activating the mute function
two . Change the ringtone
2. Indoor unit functions
”
After turning off the device, all ringtone settings will be reset to factory settings.
A Set the ring tone of the indoor unit
Machine Translated by Google
