to talk to the visitor.
A. Installation and location of the indoor unit
5. If it is necessary to resume the conversation after hanging up, first press the “
B. Make a mark and drill a hole on the wall
will deactivate if the button is pressed again. The screen automatically turns off in 30 seconds if the call is not answered.
one time.
and then the button
Vertical Effective Reach
VDP03-B3 Kit 3
2. The user inside can press the button “ to talk to the visitor.
to open the door.
”
”
”
First, determine the location and
height to install the indoor unit; the
reference height is 150-165 cm from the
center of the screen to the ground.
Drilling diameter: about 1.5cm
B.Instructions for doorbell operation
”
6. In indoor unit standby mode, press “ button first and then “ button to unlock the door, the display will turn off automatically in 90 seconds or it
can be turned off by pressing “ button.
Approximately 175 cm
Make a mark and drill a hole after
determining the location on the wall.
3. In intercom mode, indoor user can press “ talk” button 4. In intercom mode, indoor user can press “talk”
button, or the conversation will end automatically in 90 seconds.
”
3.Instructions for installing the indoor unit
Note: The conversations will be activated when you press the “ button for the first time and will be
”
”
”
Approximately 150 cm
Figure 3
Figure 4
1. When any visitor presses the call button on the outdoor unit, the screen of the indoor unit will show the outdoor image in
real time and the doorbell will ring.
”
“
to finish of
Effective range: 30cm
electric felling
150
c
m-1
6
5c
m
30cm
Machine Translated by Google