ZKTeco SC800, Руководство пользователя

Страница: 49 / 123

SC800 User Manual
P a g e | 48 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

Tap Date and Time Auto Sync to enable automatic time synchronization
based on the service address you enter.

Tap
Set the NTP Server Address
to manually set the date and time and
then tap to Confirm and save.

Tap
Select Time Zone
to manually select the time zone where the device
is located.

Enable or disable this format by tapping 24-Hour Time. If enabled, then
select the
Date Format
to set the date.

Tap Daylight Saving Time to enable or disable the function. If enabled,
tap
Daylight Saving Mode
to select a daylight-saving mode and then
tap
Daylight Saving Setup
to set the switch time.
Week Mode Date Mode

When restoring the factory settings, the time (24-hour) and date format
(YYYY-MM-DD) can be restored, but the device date and time cannot be
restored.