ZKTeco G4[QR], Инструкция по эксплуатации

Страница: 60 / 77

G4[QR] User Manual
P a g e | 60 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Find the access control QR code on the ZKBioSecurity Mobile App. Align
it with the QR code scanner at the bottom right corner of G4[QR]. The
gate will open when verification is successful.
About how to set the access control QR code, please refer to Chapter 7.5
of the
[ZKBioSecurity Mobile APP User Manual]
.
Access Control
Record Warning
When the remaining access control record space reaches a set value, the
device will automatically display a remaining record memory warning.
When the value is set as 0, the function is disabled.
Number of
Circularly Delete
Access Control
Records
When the access record memory has reached full capacity, the device will
automatically delete a set value of old access records. When the value is
set as 0, the function is disabled.
Number of
Circularly Delete
Access Control
Photos
When the space storing the access control photos have reached full
capacity, the device will automatically delete a set value of old access
control photos. When the value is set as 0, the function is disabled.
Periodic Deletion of
Unregistered User
Photos
When the space storing block listed photos have reached full capacity,
the device will automatically delete a set value of old block listed photos.
When the value is set as 0, the function is disabled.
Delay Duration of
the Confirmation
Screen
This is the length of time that a user’s information will display on the
system's screen after successful verification.
Facial Verification
interval
This is the facial template matching time interval that users can set as 0
to 9 seconds.
10.3.3 Validity Period of User Information
This is used to determine if user validity periods are enabled or disabled when registering users.
•
Tap User Validity Settings to enable.
•
When User Validity Settings is enabled, the following interface will display. Select the setting
you would like to configure.