EFace10
User Manual
P a g e
| 52
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
15
Connect to
ZKBioSecurity
Software
Set the Communication Address
15.1
Device side
1.
Tap
COMM.
>
Ethernet
in the main menu to set the IP address and gateway of the device.
(
Note:
The IP address should be able to communicate with the
ZKBioSecurity
server, preferably
in
the same network segment with the server address)
2.
In the main menu, click
COMM.
>
Cloud Server Setting
to set the server address and server port.
Server address:
Set the IP address as of
ZKBioSecurity
server.
Server port:
Set the server port as of
ZKBioSecurity
(The default is 8881).
Software side
Login to
ZKBioSecurity
software, click
System
>
Communication
>
Communication Monitor
to set the
ADMS service port, as shown in the figure below:
Add Device on the Software
15.2
Add the device by searching. The process is as follows:
1.
Click
Attendance
>
Attendance Device
>
Device
>
Search
, to open the Search interface in the
software.
