EFace10
User Manual
P a g e
| 9
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Face Registration
1.2
Try to keep the face in the centre of the screen during registration. Please face towards the camera and
stay still during face registration. The screen should look like this:
Correct face registration and authentication method
Recommendation for registering a face
When registering a face, maintain a distance of 40cm to 80cm between the device and the
face.
Be careful to keep your facial expression natural and not to change. (smiling, drawn face, wink,
etc.)
If you do not follow the instructions on the screen, the face registration may take longer or
may fail.
Be careful not to cover the eyes or eyebrows.
Do not wear hats, masks, sunglasses, or eyeglasses.
Be careful not to display two faces on the screen. Register one person at a time.
It is recommended for a user wearing glasses to register both faces with and without glasses.
Recommendation for authenticating a face
Ensure that the face appears inside the guideline displayed on the screen of the device.
Sometimes, authentication may fail due to the change in the wearing glasses then the one
used while registration. In such a case, you may require authenticating your face with the
previously worn glasses. If your face was registered without glasses, you should authenticate
your face without glasses further.
If a part of the face is covered with a hat, a mask, an eye patch, or sunglasses, authentication
may fail. Do not cover the face, allow the device to recognize both the eyebrows and the
face.
