EFace10
User Manual
P a g e
| 35
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Factory Reset
6.4
The Factory Reset function restores the device settings such as communication settings and system
settings, to the default factory settings (this function does not clear registered user data).
Tap
Reset
on the
System
interface and then tap
OK
to restore the default factory settings.
USB Upgrade
6.5
With this option, the device firmware can be upgraded by using the upgrade file on a USB disk. Before
conducting this operation, ensure that the USB disk is properly inserted into the device and contains the
correct upgrade file.
If no USB disk is plugged in, the system gives the following prompt after you tap
USB Upgrade
on the
System
interface.
NOTE:
If an upgrade file is required, please contact our technical support. A firmware upgrade is not
recommenced under normal circumstances.
