C2-260/inBio2-260 Access Control Panel
User Manual
P a g e
| 34
Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Get Personnel Information
It displays the current number of personnel, fingerprints, finger vein, and face templates in the device. The
final value will be displayed in the device list.
Get Transactions
It fetches the transactions from the device into the system. Two options are provided for this operation:
Get New Transactions and Get All Transactions.
Get New Transactions:
The system only gets new transactions since the last collected and recorded
transaction. Repeated transactions will not be rewritten.
Get All Transactions:
The system will get transactions again. Repeated entries will not be shown twice.
When the network status is healthy, and the communication between the system and device is normal,
the system will acquire the transactions of the device in real-time and save them into the system database.
However, when the network is interrupted, or communication is interrupted for any reason, and the
transactions of the device have not been uploaded into the system in real-time,
Get Transactions
can be
used to acquire transactions of the device manually. Besides, the system, by default, will automatically
acquire transactions of the device at 00:00 on each day.
Note:
An Access controller can store up to 100 thousand transactions. When transactions exceed this
number, the device will automatically delete the oldest stored transactions (deletes 10 thousand
transactions by default).
View Rules of Devices
Shows the Access rules in the device.
