C2-260/inBio2-260 Access Control Panel
User Manual
P a g e
| 25
Copyright©2020 ZKTECO CO., LTD. All rights reserved.
5.4.1
Adding a Device
There are two ways to add Access Devices.
Add Device by Searching Access Controllers.
Search the Access Controllers in the Ethernet.
1.
Click
Access > Device > Search Device
to open the Search interface.
2.
Click
Search
, and it will prompt
Searching…….
3.
After the search is complete, the list and the total number of access controllers will be displayed.
Note:
UDP broadcast mode will be used to search the access devices. This mode cannot perform a
cross-router function. The IP address can provide a cross-net segment, but it must be in the same subnet,
and the Gateway and IP Address must be configured in the same network segment.
