C2-260/inBio2-260 Access Control Panel
User Manual
P a g e
| 26
Copyright©2020 ZKTECO CO., LTD. All rights reserved.
4.
Click
Add
in the search list.
If the device is a pull device, you may enter a device name and click
OK
to complete adding the device.
Clear Data in the device when Adding:
If this option is selected, after adding a device, the system will
clear all data in the device (except the event logs).
If the device is a push firmware device, the following windows will pop-up after clicking
Add
. If the IP
Address in
New Server Address
is selected, then configure the IP address and port number. If Domain
Address in
New Server Address
option is selected, then set the Domain address, port number, and DNS.
The device will be added to the software automatically.
