BG500 Series Barrier Gate
User Manual
P a g e
|
10
Copyright©2022 ZKTECO CO., LTD. All rights reserved.
5.3.3
Installation of the Fence Boom Arm
1.
Install the fence boom install part after disconnecting the machine's power.
2.
Fix the fence boom.
3.
Adjust the vertical and horizontal position of the boom arm.
4.
Start the power supply and observe the running state of the machine. If the boom arm
open shaking, it is then necessary to loosen the spring and slow down the speed
appropriately. It is also necessary to tighten the spring and slow down the speed
accordingly if the boom arm closes shaking.
Notes
：
1)
Before the machine is energized to run the test, please make sure to install the barrier
boom of the corresponding length for the test. If the barrier boom is not installed,
please adjust, and remove the spring under the guidance of a professional person.
2)
If the length of the barrier boom is cut and adjusted, the tightness of the spring and
the position of the hanging hole must to adjusted accordingly in order to avoid the
abnormal condition of the machine that cannot drop the boom.
