BG500 Series Barrier Gate
User Manual
P a g e
|
7
Copyright©2022 ZKTECO CO., LTD. All rights reserved.
5
Installation Procedure
Installation Precautions
1.
Install the parking barrier on a level ground. If the ground is not firm and level, a cement
base is needed before the installation.
2.
The length of the boom can be cut but cannot be increased. To establish new balance
after cutting the boom length, the spring balance must be reset. The bottom of the
spring has two plastic nuts for adjusting the new balance.
3.
When the power is on, do not make any changes to the wire connections inside.
4.
The GND should be connected to the cabinet for secure protection.
Cable Embedding
1.
Prepare for a total of φ25 protective sleeve and cable in advance.
2.
Connect the route cables through the protective sleeves.
3.
Use a tool to open a cable tray on the ground.
