BG2000 Series Barrier Gate (APP Version)
User Manual
P a g e
| 25
Copyright©2022 ZKTECO CO., LTD. All rights reserved.
until you hear a beep sound from the Mainboard, it means the pairing is successful, and then press
[Menu/save] exit the menu.
8.4.2
Unpairing
Long press [Menu/save], then press [Stop/
▼
] flip down to [15EXXX]. Press [+/-] to set the parameter
value, and then set the parameter value to "15E200". Press [Menu/save] to save the setting and that all
the remote controls have been deleted.
Set Delay for Automatic Closing after Opening the Boom
Arm(Support setting on the ZKBarrier APP)
Long press the [Menu/save] button, then press [Stop/
▼
] flip down to [11EXXX] parameter, and then
press the [+/-] to set the parameter value after selection. Set the delay value as per the requirements.
Finally, press [Menu/save] to exit the menu. For example, if it is set to "11E007", the device will
automatically close after 7 seconds after opening the barrier gate.
