background image

ZKS Group Company Limit 

 

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------

ZKS Group Company Limited 

Address: No 552 Dong Zhou Road, Shanghai China 

TEL: +86-21-67679389 FAX: +86-21-67679336 

www.zksgroup.com 

8

 

Chapter 2 Function 

Features 

1. More convenient, no need to use a string of key to try. 

 

2. Open the door through advanced optical fingerprint module.   
3. More modernization, no hole design against thief. 
4. Action status prompt, such  ‡ Please close the door• ,  ‡ Closed• ,  ‡ Opened• ,   
5.  The  4

th

  generation  fingerprint  identification  technology,  it  identify  living  body,  then 

scan fingerprint grain, the door will open automatically along with music after press 
your fingerprint. 

6. Adopt Dezhou core chips, lower power consumption, more reliability. 
7. Zinc alloy for higher quality, first grade standard against  fire, key parts with SUS304 

stainless steel. 

8. LED liquid crystal display time and ID number. 
9.  5V  USB  external  power  and  data  download,  you  can  recharge  the  battery  through 

charger if no power, you also can download user data to U disk flash. 

2.1 By Fingerprint 

The following steps show you how to use fingerprint to open the door:   

④Press Power button at front panel to make the fingerprint sensor light turn on.   
⑤Put registered fingerprint on fingerprint sensor. 
⑥The lock will read and match the fingerprint, if succeed, you can hear  ‡ Di┈┈•   once. 
⑦The electronic engine move and enable lock body to open the door.   
⑧If failed to identify the fingerprint at first time, the sensor light will shine again after 

prompt, please put your fingerprint on sensor again to identify.   

⑨If failed to read the fingerprint for 2 times, the sensor light will turn off, you can press 

power button to restart the lock again.   

2.2 Anti-lockup 

Press down【 】button for 3 seconds at the back of lock panel, you will hear Di from 

the lock, the lock has anti-lockup already.     
Remarks: It is effective after the core lock is extended. After the lock is lockup, the 

common users can”t open the door through fingerprint, card and password, 

Содержание ZKS-G1





















Отзывы: