background image

ZKS Group Company Limit 

 

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------

ZKS Group Company Limited 

Address: No 552 Dong Zhou Road, Shanghai China 

TEL: +86-21-67679389 FAX: +86-21-67679336 

www.zksgroup.com 

15

following steps:   
1. Insert U disk flash with USB converter to the lock USB port.   
2. Press down【0】for 3 seconds, you will hear ‡ Di┈┈Di┈┈•  from the lock, then release the 

button to enter into U disk flash operation condition.   

3. Input original admin password 111111 or identify your registered admin fingerprint, 

the screen show Success, and ZKS Logo on front panel will shine green light once. If 
hear failed voice, means your fingerprint is failed to verify.  If failed to identify for 2 
times continuously, the system may exit the menu automatically, you need to repeat 
this step.   

4. Press down【1】button, and enter into Download condition after you hear DiDi. 
5.  If  screen  shows  success,  while  hear  ‡ Di┈┈Di┈┈• from  the  lock,  means  the  data  has 

downloaded successfully.   

6. The lock system may exit automatically after finishing downloading.   

 

3.6 Clear Admin By U-Disk 

When admin resigned or lost the admin card, and can”t enter the lock management, 

you can use U disk flash to clear the admin, please see the following steps: 
1、Copy the file that provided by manufacture to a blank U disk flash. 
2. Please insert U disk flash with converter to the lock USB port.   
3. Press【3】button for 3 seconds, after you hear ‡ Di┈┈Di┈┈• , please release the button 

to enter U disk operation condition.     

4. Input original admin password 111111 or identify your registered admin fingerprint, 

the screen show Success, while hear ‡ Di┈┈Di┈┈Di┈┈•  from the lock (press【 】after 
input original password 11111④. If screen shows failed, while hear ‡ Di┈┈Di┈┈• from 
the lock, means your fingerprint is failed to verify.   

5. Press【2】button, when you hear ‡ Di┈┈•  from the lock, then you can enter into clear 

admin mode.   

6. After you hear Success voice, means clearing admin successfully. 
7. The lock system may exit the menu automatically after clearing admin.   

 

3.7 User Data Storage   

Содержание ZKS-G1





















Отзывы: