ZKS Group Company Limit
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ZKS Group Company Limited
Address: No 552 Dong Zhou Road, Shanghai China
TEL: +86-21-67679389 FAX: +86-21-67679336
www.zksgroup.com
11
button after input admin password 11111④. If the screen shows Failed, while the lock
gives ‡ Di┈┈Di┈┈• , your fingerprint is failed to verify.
3.
Press【 】button within 3 seconds, then release the button after you hear DiDi from the
lock.
4.
The screen shows Success, while the lock give ‡ Di┈┈Di┈┈Di┈┈• , at this time the door
has initialized successfully.
3.3 Add User
There have 2 kinds of users: admin and user, when you want to add user, you can
select fingerprint or card. After you add admin, the original admin is invalid.
3.3.1 Add User Fingerprint
④Press【1】button for 3 seconds, please release the button to enter user enrollment when
you hear ‡ Di┈┈Di┈┈• .
⑤ Please input original admin password 111111 or identify your registered admin
fingerprint, the screen shows Success, while the lock gives ‡ Di┈┈Di┈┈Di┈┈• (Press【 】
button after input admin password 11111④. If the screen shows Failed, while the lock
gives ‡ Di┈┈Di┈┈• , your fingerprint is failed to verify.
⑥Press【1】button to enter to register user condition after you hear DiDi from the lock.
⑦Press【1】button again to register fingerprint for users.
⑧After you hear DiDi from the lock, please select user ID number,【1】button to add 1, 【2】
to reduce 1, then put your fingerprint on the sensor for a while, then remove it
when you hear ‡ Di┈┈• , please repeat this action for 3 times, and the LCD screen
shows Success while hint ‡ Di┈┈Di┈┈Di┈┈• , means the user fingerprint has registered
successfully.
⑨If the sensor window light is still on, you can continue to register fingerprint for the
users, you only need to repeat the above 5th step.
⑩After register successfully, please wait for 3 seconds, LCD will show Failed while hint
‡ Di┈┈Di┈┈• , the system will exit the user enrollment automatically.
3.3.2 Add User Card
Please see the following steps:
④Press down【1】button for 3 seconds, you will hear DiDi, please release the button to
