ZKaccess C3-100, Инструкция по установке и эксплуатации

Страница: 14 / 37

Instructions for Installation and Use of the C3­100/200/400 Control Panel
11

Note: The diagram above takes the C3­400 for example. By contrast, only
one­door two­way access is applicable to the C3­100 system; only two­door
one­way or two­door two­way access is applicable to the C3­200 system.
The access control management system consists of two parts: management
workstation (PC) and control operator panel. They communicate via TCP/IP and
RS485 networks. On a 485 bus, each management workstation can be connected
with up to 63 C3 control operator panels (preferably fewer than 32). The
communication wires should be kept away from high­voltage wires as far as
possible, and should be neither routed in parallel with nor bundled with power wires.
A management workstation is actually a PC connected to the network. By running
the access control management software installed in the PC, access control
management personnel can remotely perform various management functions, like
adding/deleting a user, viewing event records, opening/closing doors, and
monitoring status of each door in real time.