Steering knob:
Use the steering knob in just the same way as the steering wheel on actual vehicle: roll left to turn left,
roll right to turn right, and release to go straight.
Steering knob.eps
When you’re finished driving, slide ON/OFF on the CONTROLLER to OFF and retract the
CONTROLLER’S antenna.
Wheel Alignment: If the micro RC does not drive in a straight line when you release trigger, adjust the
wheel alignment screw on the bottom of the micro RC by the screwdriver or the
steering Trim
located
on the left of the CONTROLLER.
Note:
1.
The Wheel Alignment only takes effective when both of the CONTROLLER and the micro RC are
turned on.
2.
If you make alignment by adjusting the wheel alignment screw on the bottom of the micro RC, it is
necessary to keep the car running. (I.e. to push/pull the trigger during the alignment process).
Wheel alignment.eps
and
steering trim.eps