1) Set ON/OFF on the CONTROLLER to OFF.
2) Slide the battery compartment cover in the direction of the arrow to remove the cover.
3) Insert four AAA batteries in the compartment according to the polarity symbols (+ and -) marked
inside.
4) Replace the cover and snap shut.
If you notice the LED of your CONTROLLER dimming, it is time to replace the batteries.
Installing batterys.eps here.
Installing Batteries Cautions:
Use only fresh batteries of the required size and recommended type.
Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or
rechargeable batteries of different capacities.
If you do not plan to use the micro RC for a week or more, remove all the batteries from the
CONTROLLER. Batteries can leak chemicals that can destroy electronic parts.
Never leave dead or weak batteries in the CONTROLLER.
Dispose of dead batteries promptly and properly; do not burn or bury them.
4
Zip Your Car Together
1) Mount the HUBCAPS to the front axle wheels, and then press the TIRES over the HUBCAPS as
shown.
Mount front axle wheels.eps
2) Install the STOCK MOTOR WITH DRIVE GEAR in the groove on the back of the CHASSIS.
3) Carefully snap the MOTOR CLIP WITH SET SCREW into the groove closest to the MOTOR as
shown.
Install motor1.eps