CONTROL PANEL
CONTROL PANEL
Extra control panel
Flybridge
(optional)
External GPS
(optional)
Standard cable
(15m)
Extension cable
(optional)
Main control panel
Main bridge
1 ROUTE CABLES
Route the cables between the control panel(s), the distribution unit(s) and
optional equipment. Use optional extension cables if necessary.
A detailed wiring diagram is available on the other side of this folder.
Top view
Max
5˚
Max
5˚
2 PREPARE THE DASH
The control panel must be mounted within certain angles relative to the
boat’s axes for the built-in sensors to deliver reliable output.
Locate a free area on the dash suitable for mounting the control panel.
Use the control panel’s template as a guide to see if it will fit next to other
instruments.
NOTE! 0.5 m (1.6 ft) safe distance to magnetic compass.
NOTE! Any angle betwen 0-180°
Distribution
unit(s)
0˚
180˚
Ignition switch
Distribution unit
External GPS
NMEA 2000 network
Extra Control panel
1
2
4
3
3 MOUNT THE CONTROL PANEL
Connect the cables on the back of the Control panel.
Flush mount option: refer to www.zipwake.com for a drawing and 3D model.
Prepare the cables
Route the standard and
optional cables
Snap off the frame
Drill holes (x4)
Drill hole
1.
Pilot hole
2.
Hole saw
Ø 3 mm (1/8")
Ø 76 mm (3")
Ø 2.5 mm (3/32")