INTERCEPTOR
Remove excess antifouling
when the paint is dry
Run a thin knife or a
spatula along the blades
to ascertain unrestrained
blade motion
6 PAINT THE INTERCEPTORS WITH
ANTIFOULING
1
2
5 INSTALL THE INTERCEPTOR FRONTS
Best tool
Spray
2nd Best tool
Roller
Apply Antifouling
Interceptor front:
T30 (PT 6.0x60)
400 E:
600 E:
800 E:
1000 E:
x2
x3
x5
x7
7 Nm
(5.1 Ib-ft)
Interceptor front:
T40 (PT 8.0x70)
400 E:
600 E:
800 E:
1000 E:
x4
x6
x8
x10
15 Nm
(11 Ib-ft)
DISTRIBUTION UNIT
Interceptor
Interceptor
Transom
inside view
Starboard
Port
Max combined length (6 m)
(st extension cable)
(3 m)
(3 m)
(1.5 m)
(3 m)
180 mm (7.1")
1 MOUNT THE DISTRIBUTION UNIT
2 CONNECT THE DISTRIBUTION UNIT
Mount the distribution unit inboard where it is easy to connect it to both
interceptors and power supply (battery) e.g. the engine room or other
suitable compartment.
NOTE!
The maximum cable length (including extra cable) from an interceptor to
the distribution unit is 6 m (20 ft).
NOTE! Detailed wiring diagram is available at the end of this folder.
1. Drill holes (x2)
2. Fasten screws (x2)
Ø 4 mm (5/32")
T25 (ST 4.8x38)
Interceptor 1
Interceptor 1
Optional
interceptor
Control
panel
DU-EX
(optional)
Power cable
Battery
Main
switch
15A Fuse