24
UC5 IM 1-6 April 2002
c) Attach the Printed Circuit Board Interface (2) to the Studs (25) using
four M3x25 Screws (20).
d) Connect the free end of the Ribbon Cable (27) to CN102 of the Printed
Circuit Board Interface (2).
e) Connect the Shielded Cable (4) to CN101 of the Printed Circuit Board
Interface (2).
f) Set all switches on DIPSW 101 of the Printed Circuit Board Interface
(2) to OFF.
g) Set DIPSW 103-8 of the Mainframe MPU Board (Online On/Off) to
ON.
4. Pop out the communication port cover plate from the lower centre of the
rear cover panel.
5. Reinstall the rear and front cover panels of the Digital Duplicator.
Printed Circuit Board
Содержание UC5
Страница 1: ...Installation Manual UC5 Revision 1 6...
Страница 2: ...2 UC5 IM 1 6 April 2002...
