ASSEMBLY
ZIPPER MASCHINEN GmbH
www.zipper-maschinen.at
Seite 33
Mobile Motorsense / mobile brush cutter ZI-MOS 100-4T
Seite 33
13.1.9
Enlace the throttles well with the nylon cord.
13.2
refuelling
The brushcutter is powered by regular
unleaded gasoline.
Important:
Environmentally friendly lead-free regular gasoline can be used without
hesitation.
Refuel only the recommended fuel grades.
Allow to cool before refueling machine.
Thoroughly clean the area around the filling inlet, unscrew the filler cap and add fuel to the
lower edge of the filler neck. Tank cap back on tight screws.
Note
:
Fuel may contain substances similar to solvents.
Avoid skin and eye contact with petroleum products.
Wear gloves while refueling.
Do not inhale fuel vapors.
Store fuel away from children
13.3
fill with oil
Add oil (SAE 30 or 10W-30) into the engine.
Measure between them by inserting the dipstick
-without tighten-
between the upper and
lower
max min
mark.
Caution:
Do not overfill.
N O T E
Make sure that dust, dirt and water can not penetrate into the fuel tank.
Unscrew the fuel tank cap after refueling firmly back in place.
