SAFETY
ZIPPER MASCHINEN GmbH
www.zipper-maschinen.at
Seite 28
Mobile Motorsense / mobile brush cutter ZI-MOS 100-4T
Seite 28
Solid objects, stones, metal parts, or the like can be thrown out - risk of injury!
Use personal safety equipment: ear protectors, safety goggles,
safety shoes and safety helmet when working with the machine
Never leave the machine running unattended! Before leaving the working area switch the
machine off and wait until the machine stops.
Switch off the machine before maintenance or adjustment.
Storage always with an empty tank in a safe place.
Do not grab in the cutting tool while it is rotating.
Take care that you do not get under the cutting tool!
Always use the correct cutting tool for the work to be done.
Do not operate in an enclosed or confined areas.
Exhaust contains poisonous carbon monoxide. The exposure can cause
unconsciousness and death.
Before the start, after the failure or shock, be sure to check the device and make sure
that it is in good condition.
Wear firm gloves when you use the brush cutter or if you install or remove the cutting
blade.
TRANSPORT NOTES:
Switch off the engine
Fit the blade guard
Secure the machine
Empty tank completely, avoid fuel spillage
To avoid damage to the device never drag but always lift correctly.
STORAGE NOTES:
Remove and clean thread head and cutter blade
Fit the blade guard
Clean the machine and dry
Empty Tank completely, avoid fuel spillage
Store in a dry, out of reach of children place, well packaged (protection against
cuts)
