ASSEMBLY
30
ZI-MD300
2.
Assembly handlebar
•
Align the holes of the handlebar with the
mount bracket and secure each with a
spring washer, washer and a M10x20 bolt (1).
•
Fasten each handlebar support onto the
engine deck with a spring washer, washer
and a M8x25 hex bolt (2).
3.
Assembly back panel and tipping handle
•
Insert the back panel into the mounting
bracket and align with the mounting
bracket holes.
•
Secure the back panel at the left side with
two M8x30 hex bolts, four washers and two
nuts (2).
•
Secure the tipping handle and the back
panel on the right side with two M8x35 hex
bolts, four washers and two nuts (1).
4.
Assembly extendable sides and front panel
•
Insert the extendable sides (1) and the front
panel (2) into the mounting slots located at
the bottom panel.
