CLEANING, MAINTENANCE, STORAGE, DISPOSAL
20
ZI-EWB350
13.3
Charger
Charging the battery:
1.
remove battery from battery box
2.
connect the charger to the power supply (socket) 230 V /
50 Hz and the charging socket (1)..
3.
battery charging
4.
When the battery is fully charged (display on the charger),
disconnect the charger again.
5.
charging status is indicated by pressing button (2) on the
display (3).
Voltage display on battery box system indicates the status of the battery:
Voltage display shows 40 V
Battery capacity 100%
Voltage display shows 35 V
Battery capacity ~50%
Voltage display shows < 32 V
Please charge the battery (too less capacity left)
NOTE:
•
Avoid overheating when charging the battery. Ensure sufficient air supply so that no heat can ac-
cumulate.
•
Only charge the battery in an ambient temperature between 0° C and +40° C.
•
Allow the battery to cool down after intensive use before recharging it.
•
Always charge the battery in a well-ventilated area.
•
FIRE HAZARD! Never charge batteries near acids and flammable materials.
•
Do not smoke when charging the battery. Keep the battery away from open flames and sparks.
•
Allow the battery to cool down immediately after charging.
14
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
14.1
Cleaning
N OTE
The usage of certain solutions containing ingredients damaging metal surfaces as well as
the use of scrubbing agents will damage the machine surface!
Clean the machine surface with a wet cloth soaked in a mild solution
Never use running water or a high pressure cleaner to clean the machine.
•
Clean the outer parts with a damp sponge.
•
Never clean the electronic parts with water!
•
Check the machine and remove the deposits and / or residues with a brush.
14.2
Maintenance
CAUTION
Unplug battery before all maintenance and settings!
Serious injury due to unintentional or automatic activation of the machine!
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be serviced
by trained persons only.
N OTE
Clean your machine regularly after every usage – it prolongs the machines lifespan and is
a pre-requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!
•
Check regularly the condition of the security stickers. Replace them if required.
•
Check regularly the condition of the machine.
•
Store the machine in a closed, dry location.
14.2.1
Maintenance plan
After each workshift:
•
Check the cables (tight fit, damage)
Monthly:
•
Charge the battery (for longer period of storage): Monthly check of the charge level.
14.3
Storage
•
Clean thoroughly all components before storage.
•
Store all components separately in a dry area at not less than 0 ° C.
