ASSEMBLY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
20
ZI-RTR40V-AKKU
CAUTION
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
NOTICE
A safety note designed in this way indicates a potentially dangerous situation which, if
not avoided, may result in property damage.
12
ASSEMBLY
Please check the product contents immediately after receipt for any eventual transport damage or
missing parts. Claims from transport damage or missing parts must be placed immediately after
initial machine receipt and unpacking before putting the machine into operation. Please understand
that later claims cannot be accepted anymore
12.1
Assembly steps
1. Assembly guard
Place the guard on the 4 holes provided and
fix it with the screws
2. Assembly plant protector
Insert the plant protection bracket (1) in the 2
holes (2) provided for this purpose. The plant
protection bar can be folded up or removed
when not in use
3. Assembly wheel
The wheel is supplied together with the spare
holder. Remove the wheel from the reserve
holder by pressing the lock clip and place it on
the pre-assembled holder on the machine.
13
OPERATION
Machine to be operated in a perfect state only. Inspect the machine visually every time it is to be
used. Check in particular the safety equipment, electrical controls, electric cables and screwed
connection for damage and if tightened properly. Replace any damaged parts before operating the
device.
13.1
Operation instructions
WARNING
Unplug battery before all maintenance and settings!.
