OPERATION
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
18
ZI-KSS1945
5.
Attachment arms
Press the lever on the attachment arms
and put them on the undercarriage at the
desired location.
Fix the position by letting loose of the
lever.
12
OPERATION
12.1
Operation
12.1.1
Mounting of a mitre saw
The mitre saw can be fixed on the attachment arms by using the provided screws.
12.1.2
Workpiece support
The workpiece supports can be used as additional support while cutting long workpieces.
In case the length and weight of the workpiece dangers the stability, the workpiece has to be
supported additionally.
The workpiece supports can also be used as angle stops.
13
MAINTENANCE
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be
serviced by trained persons only.
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
Store the machine in a closed, dry location.
N O T I C E
Clean your machine regularly after every usage. It prolongs the machines lifespan and is a
pre-requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!
13.1
Cleaning
After each workshift the machine has to be cleaned. Remove chips, dust, etc. with a suitable tool.
NOTICE
The usage of certain solutions containing ingredients damaging metal
surfaces as well as the use of scrubbing agents will damage the machine
surface!
Clean the machine surface with a wet cloth soaked in a mild solution
13.2
Disposal
Do not dispose the machine in residual waste. Contact your local authorities for information
regarding the available disposal options. When you buy at your local dealer for a
replacement unit, the latter is obliged to exchange your old.
