ZIPPER MASCHINEN 9120039232959, Руководство пользователя

Страница: 28 / 60

INHALT / INDEX / INDICE/
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at  28
ZI-MOS145A / ZI-MOS4TA
15 TROUBLE SHOOTING
Trouble Possible cause Solution
Engine does not start  Incorrect starting sequence  Observe the correct starting
sequence
 Dirty air filter  Clean/replace air filter
 No fuel supply  Refuel
 Fault in the fuel line  Check the fuel line for kinks or
damages
 Engine flooded.  Screw off, clean and dry the spark
plug. Then pull the cranking rope
several times and reinstall the spark
plug
 Spark plug connector not
placed on.
 Place on the spark plug connector
 No ignition spark  Clean/replace spark plug
 Check ignition cable
Engine starts and is stalled
immediately
 Incorrect idle adjustment  Contact customer service
Machine works with
interruptions
 Carburetor incorrectly
adjusted
 Contact customer service
 Spark plug fouled  Clean/replace spark plug
 Check spark plug connector
Smoke  Incorrect fuel mixture
(2-stroke engine)
 Use correct fuel mixture
 Carburetor incorrectly
adjusted
 Contact customer service
Machine does not work with
full performance
 Machine overloaded  Too much pressure
 Cutting material too tough
 Dirty air filter  Clean/replace air filter
 Carburetor incorrectly
adjusted
 Contact customer service
Blade rotates at idling  Idle speed too high  Adjust a lower idle speed
Blade rotates but has no
power
 Choke is ON  Set Choke to OFF
Bad cuts  Foreign material wrapped,
grass around the sheet
 Shut machine off, wait until cutter
stands still, remove the winded up
material
 Long grass  Remove material
 Blunt saw blade  Sharpen or replace saw blade
NOTICE
Should you in necessary repairs not able to properly to perform or you have
not the prescribed training for it always attract a workshop to fix the problem.