29
Foam sanded flush with sponson plates.
Sponson sheeting order. Needed for correct overhangs.
1 and 2 glued in place. Note masking tape.
Use your sanding block with 80 grit
paper to sand the foam flush with both
sponson plates.
Using epoxy, glue R-1 in place on the
sponson step. Use masking tape to hold
it in place while it cures.
It’s okay to repeat the steps on the other
sponson.
Glue R-2 to the sponson rear.
Once these have cured, sand the bottom
and sides of R-2 and R-1 flush.
