13
807042 v1.00 03.21 HydroTap G5 UltraCare Install Instruct
Installation instructions
Tap hose connections (refer to diagram on the following page)
4.5
Remove all other
connection caps
Remove the two red
mixer caps ONLY if
HydroTap Mixer is to
be fitted
Tips for hose connection
• Push the hose over the connector
for a minimum of 15mm.
• There a constant fall from the tap
down to the Command Centre.
• Hoses must be trimmed to avoid
loops and kinks. Take care when
positioning before cutting and be
sure to make a clean cut straight
across the hose, using a sharp blade.
• The hoses must not be under
tension when installed.
• Hoses must not be lengthened
beyond the maximum supplied
1-metre length.
• Ensure the cut edges are not sharp,
before fitting the hose.
