Zip InLine ES3 Скачать руководство пользователя страница 5

 

ES3, ES4 & ES6 Instructions. Issue: No. 2 

Page 3  

February / 2012

Safety Information
WArnIng

• 

 

Installation,  commissioning and maintenance of this appliance must 
only be carried out by a competent installer who will then be responsible 
for adhering to all relevant standards and regulations.

• 

 

The front cover of the appliance must never be opened before 
disconnecting the appliance from the mains power supply

.

• 

 The appliance must be permanently connected to the supply through an 
isolating switch with a contact separation of at least 3mm in all poles. 

• 

 To protect the appliance, a circuit breaker must be fitted with a rating suitable 
for the nomi nal current of the appliance.

• 

 The cross sectional area of the connection cable must be appropriate for the 
power rating and location of the appliance. See Technical Data. 

• 

 The connecting cable must be adequately secured.

• 

 This appliance must be earthed at all times.

• 

 Check that the power supply is switched off prior to electrical connection.

• 

 The  appliance, its wiring and piping must not be modified in any way.

• 

 In  case of malfunction isolate the power supply immediately. In case of leaks 
also isolate the water supply. Repairs must only be carried out by Zip Heaters 
(UK) Ltd or an authorised Zip service engineer.

• 

 Temperatures in excess of approximately 43°C are perceived as hot, especially 
by children, and may cause a feeling of burning. 

• 

 

This appliance must not be used by any person (inclu ding children) with 
limited physical, sensorial or mental abilities or failing experience and/or 
knowledge unless they are supervised by a person responsible for their safety 
or received instructions about how to use the appliance. 

• 

 Children should be supervised in order to make sure that they do not play 
with the appliance.

WArnIng:

Indicates a potentially hazardous situation, which, if 
not avoided, could result in death and/or serious injury  
and/or property damage.

CAUTIOn:

Indicates a potentially hazardous situation, which, if not 
avoided, may result in property damage. 

IMPOrTAnT:
PLEASE rEAD THESE InSTrUCTIOnS CArEFULLY. 
nOTE THE SAFE OPErATIOnAL rEQUIrEMEnTS, WArnIngS AnD CAUTIOnS. USE 
THIS PrODUCT COrrECTLY AnD WITH CArE FOr THE PUrPOSE FOr WHICH IT IS 
InTEnDED. FAILUrE TO DO SO MAY CAUSE DAMAgE AnD/Or PErSOnAL InJUrY, 
AnD WILL InVALIDATE THE WArrAnTY. rETAIn THESE InSTrUCTIOnS FOr FUTUrE USE.

Содержание InLine ES3



















Отзывы: