16
Installation instructions & user manual
T210029 v2.01 Dec 2020 - ZIP HC03CTU15
Technical support
Tel: 0345 6 005 005 email: aftersales@zipindustries .co.uk www.zipwater.co.uk
Installation
Unpacking
•
Cut the packing straps (1) and pull up the
cardboard box and the inner caps.
•
Inspect for damage, if damaged call the Zip
Water team on 0345 6 005 005.
•
If the water dispenser has been shipped
horizontally or at an angle, it will be necessary
to stand it vertically, then wait at least 24 hours
before use, in order to allow the refrigerant to
settle.
Read and understand the specific installation warning and precautions
before starting this operation
(see page 4)
!
Positioning
•
Place on a flat, level and stable surface sufficient to support
the weight of the water dispenser when full,
(see data table, page 14).
•
Observe the clearance envelope, (see page 9).
•
Electrical power and wholesome mains water supply
outlets complying with the data table (see page 14) and
rating plate (see page 13) must be available near the water
dispenser and located so that the power cable and water
pipe are not obstructed.
1
