background image

81507 - Zip Freestanding Chilled Water Systems - Installation & Operating Instructions -  April 2015 v2.03 

Page 2 of 8

Read These Warnings First

Finished height will vary due to adjustable feet (Chillmaster only). The average height for the centre line of the plumbing 
services is 790 mm.

Place the unit on a level floor and screw the feet in or out as appropriate to make the unit level and steady (Chillmaster 
only), see Fig.1. 

Leave at least a 50 mm gap between the 
sides of the unit and any walls, to allow 
air flow through the vents. 

The rear of the unit can be flush 
mounted against the surface of a wall if 
the plumbing permits.

Connect only to cold water 10-38°C with 
a pressure range of 70 kPa - 700 kPa.

•       Please read all installation requirements, installation procedures and precautions before installing 

any Zip Chillmaster/Sitemaster/Economaster.

•       Never attempt to install any Zip Chillmaster/Sitemaster/Economaster without reading all of the 

applicable instructions. 

•       All electrical connections must comply with current wiring rules.

•       These appliances ares not intended for use by persons (Including Children) with reduced physical, sensory or mental 

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning 
use of the appliances by a person responsible for their safety.

•       Children should be supervised to ensure they do not play with the appliances

•       This appliance must be earthed. 

•       If the power supply cord is damaged it must be replaced by a Zip Service Provider or a qualified electrician. 

•       The power cord and GPO must be in a safe and accessible position after installation

•       Do not remove the cover of the appliance under any circumstances without first isolating the appliance from the 

power supply. 

•       The units are for indoor use only and must not be exposed to the elements of nature.

•       These units must not be positioned in an area that may be cleaned by a water jet and must not be cleaned by a 

water jet.

Chillmaster only

Installation Instructions

Fig.1

105

170

Содержание 81507









Отзывы: