TETHERED CONTROLLER MX32, RADIO CONTROLLER MX32FU Page 13
W
26
A, 1
4. Simple turnout control
(the first time)
Operating turnouts and signals in the MX32 follows an
object-oriented
approach: In a "panel" of turn-
out and signal icons (the "panel" as a precursor to the track diagram), the individual "object" is operated
by pressing the corresponding function key. Each object or display icon must be assigned to the corre-
sponding decoder address (and/or sub address, number etc.) in a
previously executed definition
process
.
W- Key
(from
LOCO
mode)
Operating mode
SWI:
the lower display half shows a “Basis Panel”
filled with 18 “V” symbols, of which 9 are visible:
Numeric keys
1…9
operate the visible icons.
The 18 fields of the “Sample Panel” are preas-
signed to the accessory decoder addresses 10.0,
10.1, 10.2, 10.3, 11.0, 11.1, 11.2… with its 4 sub
addresses (0…3).
(
Shift)
displays the decoder addresses instead
of the field numbers. .
Scrolling wheel
Scrolls within the panel
The
default “V symbols” can be interpreted as uni-
versal left-right switches or as red-green signals.
They are, however, not real switchboard fields but
can be exchanged with proper icons (on the
SWI
DEF
definitions page).
The quickest way to change the default accessory addresses is with this shortcut:
(Shift)
+ W
+
(Shift)
Opens the
SWI DEF
page, but (because of
) the cursor jumps immediately
to the address input line (with sub addresses…) and enables the “inline scroll option”, which al-
lows the addresses to be changed one by one without any further scrolling, confirming each with
the
A-Key
; use the
U-Key
to switch between “scroll in line” / “scroll panels”.
(SHIFT)
+ W
(without the extra
(Shift))
Opens the definition’s page. Start with the top left field
gr/rg
– setting, go to all other fields using the scrolling wheel.
Exit to the
SWI
panel after the desired changes are made in
SWI DEF
with:
W- Key
saves the newly entered data
(i.e. the addresses) and returns
to the
SWI
mode.
E- Key
exits the definition screen WITHOUT
saving, back to
SWI
W- Key
returns to the
LOCO
mode.
W
For more info: go to the chapter
dealing with the
SWI
operating mode.
NOTE: Entering and operating an accessory address:
A- Key
LOCO IN
, enter the desired ad-
dress, then
W- Key
ACC LIST
, operate or edit turnout / signal. Softkey II
returns to
LOCO.
