TETHERED CONTROLLER MX32, RADIO CONTROLLER MX32FU Page 41
“BROADCAST STOP” and “Track Pwr OFF”
are system states
(in contrast to EMER-
GENCY STOP); that’s why the appropriate
stop window appears on all cabs; such a sys-
tem state can likewise be cancelled from all
cabs (
S-Key
).
Here, too, the scrolling wheel (or the U- and A-key) is used
to make further selections (or S and TP-Key).
Cancel broadcast stop
S-Key
= Resumes driving after BROADCAST STOP
Hide window
A-Key
= BROADCAST STOP remains but the window does no
longer block the display content, “SINGLE STOP” is in-
stead displayed in the header.
Single stop
U
+
A-Key
= Switches to EMERGENCY STOP, often after
erroneous BROADCAST STOP
Track 1 (or 2 or 1+2) Pwr OFF
TP-Key
= Turns track power off.
S-Key (short or long) + TP-Key
Track power off
(Turns track power off)
with the following options in the stop window:
ON, broadcast stop
S-Key
Hide window
OFF track 1
OFF track 2
OFF track 1+2
TP-Key
Here you can decide which track outputs should
be turned OFF (if the command station has
more than one track output).
Overcurrent- and short circuits at a track output
OVC Track OFF
Track power is turned off automatically.
Options for further actions power OFF state
.
>>> STOP
– Actuation sequences,
Summary, organized by initiating state:
>>
Directly from the driving window
LOCO
:
S (short)
EMERGENCY (single) STOP
S (long)
BROADCAST STOP
S (short or long) + TP
OFF, track 1
only power to track output 1 is turned off
S + TP + TP (2 x TP)
OFF, track 1 + 2
fastest way to turn all track power off
S (short) + A
OFF track 1, 2 or 1+2
Scroll in STOP window
>>
From the EMERGENCY STOP window:
A-Key
hide STOP window,
indication moves to header
(without scrolling because cursor is already pointing to it)
S (short)
STOP cancelled,
if slider is moved away from 0:
Resumes driving
S (long)
BROADCAST STOP
U + A
BROADCAST STOP,
to issue broadcast stop after S (short) was pressed by mistake
TP
OFF, track 1
only power to track output 1 is turned off
TP + TP (2 x TP)
OFF, track 1 + 2
fastest way to turn all track power off
>>
From BROADCAST STOP window:
A-Key
hide STOP window,
indication moves to header
(without scrolling because cursor is already pointing to it)
S (short)
BROADCAST STOP
cancelled
=
Resume driving
TP
OFF, track 1
NOTE:
“OFF, track 2” via EMERGENCY stop menu
TP + TP
(2 x TP)
OFF, track 1 + 2 f
astest way to turn all track power off
>>
From TRACK PWR OFF or OVC state window (after a short circuit):
A-Key
hide STOP
window,
indication moves to header
(without scrolling because cursor is already pointing to it)
S (short)
OFF cancelled
= power restored but with
BROADCAST STOP
S + S
(2 x S)
OFF and BROADCAST STOP cancelled
=
Resumes driving
TP
OFF, track 1 + 2
Power of both tracks outputs is turned off
>>
From the LOCO window (with STOP shown in header):
S (short)
Restore STOP window
, from there continue as above
S + S (2 x S)
STOP cancelled
= Resume DRIVING (from EMERGENCY or BROADCAST)
STOP S + S + S (3 x S)
STOP cancelled
= Resume DRIVING after POWER OFF or SHORT!
NOTE: The display in the stop window and their options also depend on the command station used,
and may therefore differ from the above descriptions relating to the MX10; For example, with the MX1
(the "old" command station), the broadcast stop state cannot be selectively applied to the track outputs
and therefore no corresponding selection is offered.
NOTE:
The BROADCAST STOP actuation can be
changed to “short” in
CAB CONF
(see chapter
CAB
CONF
), so that a broadcast stop is initiated when
the S-Key is pressed briefly:
S-Key (short)
BROADCAST STOP
