Zimmer ZR1000-A Series, Инструкция по установке и эксплуатации

Страница: 8 / 13

8
9 Transportation/storage/preservation
►
Transport and storage of the product must be done only with the original packaging.
►
If the product has already been installed on the superordinate machine unit, care must be taken during transport to
ensure that no unexpected movements can occur.
►
Before commissioning the product and after transport, check all power and communication connections as well as
all mechanical connections.
►
If the product is stored for an extended period, the following points are to be observed:
►
Keep the storage location as dust-free and dry as possible.
► Avoid temperature fluctuations/observe and adhere to the temperature range.
►
Avoid wind/drafts/water condensation formation.
►
Cover the product with a weatherproof, tear-resistant foil to prevent dust.
►
Pack the product and do not expose it to direct sunlight during storage.
► Clean all components. There must be no soiling left on the components.
►
Visually inspect all components.
►
Remove all foreign substances.
►
Properly remove potential corrosion spots.
►
Close electrical connections using suitable covers.
INSTALLATION AND OPERATING INSTRUCTIONS: ZR1000-A
DDOC01702 / -
EN / 2022-09-27
Zimmer GmbH • Im Salmenkopf 5 •

77866 Rheinau, Germany •

+49 7844 9138 0 • www.zimmer-group.com