Use
4.2. Operation
4
Page 26
4.
Select the desired module and the appropriate handpiece:
•
Roll handpiece
•
Multipolar handpiece
•
Thermal handpiece
Once the selected module is selected, the program settings screen for the respective
treatment appears.
5.
Use of the roll handpiece (example)
1.
Select one of the four options in pulse mode. (Preset value:
).
2.
Select the desired value for the vacuum mode from 7 levels. (Preset value:
4)
3.
Select the desired value for the high-frequency energy from 10 levels.
(Preset value: 5)
4.
If you want to use the laser, press the function button once, then the window
lights up. If you do not want to use the laser, press the function button again
and the laser is switched off.
5.
Ensure that the system is in ready mode and that the operating parameters
for the intended indication to be treated are correct.
6.
Press the setting button to get to the following screen mode. Here you can
adjust the volume and obtain basic information about reModel. By pressing
the X button at the upper right, you can exit this screen mode and return to
the main treatment module.
6