Safety
2.2 Hazards during assembly, 2.3 Risk of fire, 2.4
Hazards due to laser radiation
2
Page 12
Hazards during
assembly
2.2 Hazards during assembly
•
Do not expose this device to direct sunlight. Assemble the device in well
ventilated interior rooms.
•
Place the device only on a flat, straight surface.
•
Protect the device from impacts. Impacts can lead to damage of the device.
•
No changes which were not authorised by the manufacturer in advance should
be made to the device.
Risk of fire
2.3
Risk of fire
•
reModel should not be used in the vicinity of flammable substances in order to
avoid fire and the risk of explosion.
•
Flammable materials such as fabric or coverings should not be used or should
be kept at a safe distance from the device.
Hazards due to laser
radiation
2.4 Hazards due to laser radiation
•
Visible laser radiation: Avoid contact of direct or scatter radiation with the eyes
or skin.
•
Never look directly into the handpiece, the fibres, or the fibre opening, even
when you are wearing protective goggles.
•
Mark the treatment rooms with laser warning signs to prevent unnecessary
personnel from being in the room during the treatment.
•
Cover reflective surfaces such as jewellery or mirrors which could direct the
laser beam into an area other than the intended treatment area.
Laser warning signs
On the back of the device
On the back of the device
On the roll handpiece, and
On the multipolar handpieces (large, medium-sized)
WARNING
Changes and the use of procedures other than those described here can lead to
hazardous radiation exposure.