Use
4.2. Operation
4
Page 25
3.
Thermal handpiece
When one of the two thermal handpieces is connected, the parameter settings
shown below become visible for the user. Only the high-frequency level can be
adjusted for the thermal handpieces.
No.
Description
1
Screen transition
Selection of the handpiece/treatment mode
2
High-frequency level (1-10) (standard level: 5)
3
Select treatment area
4
Time display (standard: 15 min)
5
Sound setting, device information
6
Standby/Ready
Main device
4.2.5 Main device
1.
When the system is switched on, the blue LED lights up as shown below,
and during operation, the orange LED lights up, as shown below.
2.
Ensure that the tip of the handpiece is always firmly and fully in contact with
the treatment area.
3.
Each time the system is switched on, the standard screen for handpiece
selection is loaded:
5