Zimmer MATCH LWR50L-27 Series, Инструкция по установке и эксплуатации

Страница: 14 / 17

14
10.2 Installing the energy supply
NOTICE
Installation of voltage supply is done internally. This means that the MATCH gripper is equipped with internal
contacts. These contacts transmit all signals.
►
The contacts of the energy supply must be dry, clean and undamaged at all times.
Ö
Damage to the contacts can result in malfunction of the product.
10.3 Static charge
CAUTION
Non-compliance may result in material damage.
Grounding the product is recommended if ESD sensitive parts come into contact with the product.
Grounding is also recommended in applications that require high EMC shielding.
The movement of the needles creates low voltages as a result of static charging. These charges cannot be dissipated if the
product is mounted on an insulating surface and if discharge is not possible through the workpiece.
INFORMATION
Ö
The cycle time must therefore be reduced as the temperature increases.
10.4 Installing accessories
NOTICE
Before installing an accessory, make sure it is suitable for use with the selected variant.
►
You can find information on our website.
►
Please contact Zimmer Customer Service if you have any questions.
INSTALLATION AND OPERATING INSTRUCTIONS: LWR50L-27
DDOC01645 / -
EN / 2022-08-08
Zimmer GmbH • Im Salmenkopf 5 •

77866 Rheinau, Germany •

+49 7844 9138 0 • www.zimmer-group.com