Zimmer MATCH LWR50L-27 Series, Инструкция по установке и эксплуатации

Страница: 11 / 17

11
6.2 Functional safety
For the overall safety of the function, all three components (MATCH robot module, MATCH gripper and MATCH storage
station) must be taken into account.
Fault elimination in accordance with DIN EN ISO 13849-2, Annex A, Table A2 and A3 for the helical compression springs
used can be given.
6.3 Control
INFORMATION
►
You can find the information in the technical data sheet on our website.
►
Please contact Zimmer Customer Service if you have any questions.
6.4 Self-locking mechanism
INFORMATION
The loose part of the product has a mechanical self-locking mechanism to ensure that the workpiece remains
held by the product in the event of power supply failure (e.g. an emergency stop).
►
Please contact Zimmer Customer Service if you have any questions.
7 Technical data
INFORMATION
► You can find the information in the technical data sheet on our website.
This data varies within the series, depending on the specific design.
►
Please contact Zimmer Customer Service if you have any questions.
8 Accessories/scope of delivery
INFORMATION
If any accessories not sold or authorized by Zimmer GmbH are used, the function of the product cannot be
guaranteed. Zimmer GmbH accessories are specifically tailored to the individual products.
►
For optional accessories and those included in the scope of delivery, refer to our website.
9 Transportation/storage/preservation
► Transport and storage of the product must be done only with the original packaging.
►
If the product has already been installed on the superordinate machine unit, care must be taken during transport to
ensure that no unexpected movements can occur.
► Before commissioning the product and after transport, check all power and communication connections as well as
all mechanical connections.
►
If the product is stored for an extended period, the following points are to be observed:
►
Keep the storage location as dust-free and dry as possible.
►
Avoid temperature fluctuations/observe and adhere to the temperature range.
► Avoid wind/drafts/water condensation formation.
►
Cover the product with a weatherproof, tear-resistant foil to prevent dust.
►
Pack the product and do not expose it to direct sunlight during storage.
►
Clean all components. There must be no soiling left on the components.
► Visually inspect all components.
► Remove all foreign substances.
►
Properly remove potential corrosion spots.
►
Close electrical connections using suitable covers.
INSTALLATION AND OPERATING INSTRUCTIONS: LWR50L-27
DDOC01645 / -
EN / 2022-08-08
Zimmer GmbH • Im Salmenkopf 5 •

77866 Rheinau, Germany •

+49 7844 9138 0 • www.zimmer-group.com