manualshive.com logo in svg

Zimmer HF150-003, Инструкция по установке и эксплуатации, Страница: 2 / 40

Поделиться
Скачать
Zimmer HF150-003 Скачать руководство пользователя страница 2

INSTALLATION AND OPERATING INSTRUCTIONS:

 

Motor spindle, HF150-003 series 

Zimmer GmbH 

•

 Im Salmenkopf 5 

•

 77866 Rheinau, Germany 

•

 

 

+49 7844 9138 0 

• 

 +49 7844 9138 80 

•

 www.zimmer-group.com

2

EN / 2020-10-22

DDOC00746 / -

Article number:   

HF150-003

Date of issue:   

2020-10-22

Index: 

 

  -

Most recent index date:  -
Document language: 

EN

Foreword

Dear Customer,

Thank you for the confidence you have placed in us by selecting our motor spindle.
Our motor spindle represents the current state of technology in terms of development and design.
In order to utilize the full performance capability of this motor spindle and maintain it in a state of constant readiness and 

efficiency, operating personnel require in-depth training from our experts.
These installation and operating instructions are a constituent part of the operating instructions of the machine in which this 

incomplete machine is installed and shall be kept available for operating personnel to use at all times in accordance with 

the Machinery Directive.
For this reason, always keep the installation and operating instructions along with the operating manual at an accessible 

work post near the machine.

Name and address of the manufacturer:

Zimmer GmbH

 Im Salmenkopf 5, 77866 Rheinau, Germany

 +49 7844 9138 0

 +49 7844 9138 80

 [email protected]

 www.zimmer-group.com

For any follow-on orders, please contact Zimmer Customer Service.

Содержание HF150-003









































Отзывы:

Нет отзывов