background image

INSTALLATION AND OPERATING INSTRUCTIONS:

2-jaw parallel gripper, electric, GEP2000 series

Zimmer GmbH 

 Im Salmenkopf 5 

 77866 Rheinau, Germany 

 

 

+49 7844 9138 0 

• 

 +49 7844 9138 80 

 www.zimmer-group.com

4

EN / 2021-07-08

DDOC01113-01 / a

1  Supporting documents

NOTICE

Read through the installation and operating instructions carefully before installing the product!
The installation and operating instructions contain important notes for your personal safety. They must be read
and understood by all persons who work with the product or have anything to do with the product during any 

phase
of the product life cycle.
The standardized installation and operating instructions (DDOC01113) contain all the information for commis-

sioning the product.
Relevant and required information for your product can be found in both installation and operating instructions.

In these installation and operating instructions, "product" refers to the product designation on the title page!

1.1  Notices and graphics in the installation and operating instructions

The individual hazard levels, notices and warnings are marked with signal words.

DANGER

This notice warns of an imminent danger to the life and health of people. Ignoring these notices can lead to 

serious injury or even death!

 

You absolutely must comply with the described measures for avoiding these dangers!

 

Ö

The warning symbols are assigned according to the type of danger.

WARNING

This notice warns of a situation that is potentially hazardous to personal health. Ignoring these notices can cause 

serious injury or damage to health.

 

You absolutely must comply with the described measures for avoiding these dangers!

 

Ö

The warning symbols are assigned according to the type of danger.

CAUTION

This notice warns of a situation that is potentially hazardous for people or that may result in material or environ-

mental damage. Ignoring these notices may result in slight, temporary injuries or damage to the product or to the 

environment.

 

You absolutely must comply with the described measures for avoiding these dangers!

 

Ö

The warning symbols are assigned according to the type of danger.

NOTICE

General notices contain usage tips and valuable information, but no warnings of dangers to health.

INFORMATION

This category contains useful tips for handling the product efficiently. Failure to observe these tips will not result 

in damage to the product. This information does not include any information relevant to health and workplace 

safety.

Содержание GEP2000 Series









Отзывы: